Showing 177–192 of 446 results

  • ISO Wool Cotton 30cm X 30cm Pack

    ISO Wool Cotton 30cm X 30cm Pack

    / Pack

    80% Wool and 20% Cotton Ballast 30×30 cm

    Consisting of clean textile pieces which shall be either white or of a light colour and which shall consist of approximately 80% wool pieces and 20% cotton pieces by mass.

    Each piece shall comprise two layers of fabric sewn together at the edges and shall be (300 +/-30) mm x (300 +/-30) mm.

  • AATCC 80% Wool 20% Cotton Ballast

    AATCC 80% Wool 20% Cotton Ballast

    / Pack

    AATCC Wool/Cotton Ballast 50X50 cm
    Consisting of clean textile pieces, white or a light color.
    In weight ratio of 80% wool & 20% cotton.
    Made up of 2 fabrics such as 100% Wool Flannel and 100% Cotton Sheeting pieces, each pieces is single layer 50×50 cm +/-5 cm (19.6 x 19.6 inches +/- 1.9 inches) all 4 sides serged.

    1 Kg Load (Pack of 19 pieces, 6 pieces of Cotton and 13 Pieces of Wool) approx. 800 grams of Wool Ballast pieces and approx. 200 grams of Cotton Ballast pieces.

  • SM 25 150MM

    SM 25 150MM

    / Pack

    SM 25
    Wool Abradent Woven Fabric
    Pre cut 150 mm Circles

  • SM 25 140MM

    SM 25 140MM

    / Linear Meter

    Wool Abradent Woven Fabric

  • SM 26 140MM

    SM 26 140MM

    / Pack

    SM 26 Felt
    Pre cut 140 mm Circles

  • PVC 60” Width

    PVC 60” Width

    / Linear Meter

    White Unembossed & Unsupported Vinyl

  • White Unembossed & Unsupported Vinyl - 70 x 150 mm

    White Unembossed & Unsupported Vinyl – 70 x 150 mm

    / Pack

    White Unembossed & Unsupported Vinyl
    Precut into 70 x 150 mm Pieces
    For GMW4659

  • PVC White Unsupported Vinyl - Full Width

    PVC White Unsupported Vinyl – Full Width

    / Pack
  • TFPC-50 Phenotest Control Fabric

    TFPC-50 Phenotest Control Fabric

    Phenolic yellowing affects natural and synthetic fibers. The phenolic antioxidants present in the packing material along with exposure to oxides of nitrogen and alkali pH of the fabric are responsible for yellowing. The Phenotest assesses the potential of phenolic yellowing of textile materials. Performing this test will
    help manufacturers understand and predict if a fabric will yellow while in its package, in transit and in storage. Phenolic yellowing is a discoloration phenomenon in textiles caused by the reaction of nitrogen oxides with yellowable phenolic compounds, often resulting in unsightly yellow stains on white or light-colored
    fabrics. The Phenotest Control Fabric is used to confirm the phenotest has been conducted properly because the control fabric has been tested and is a known fabric susceptible to yellowing under the conditions of the test. The test is considered valid if the phenotest control fabric has turned yellow.

  • W-66

    W-66

    / Pack
  • JIS Cotton Shirting #3

    JIS Cotton Shirting #3

    / Linear Meter

    Japanese Cotton Shirting # 3 (Kanakin # 3)

  • JIS #14 Twill

    JIS #14 Twill

    / Set

     

  • JIS 'L" Towel - Pack of 12

    JIS ‘L” Towel – Pack of 12

    / Pack
  • JIS Polyester

    JIS Polyester

    / Pack
  • JIS Wool

    JIS Wool

    / Pack
  • UF-400-5L

    UF-400-5L

    / Pack

End of content

End of content