Showing 81–96 of 382 results

  • Multifiber #1-4HSE Heat Sealed

    Multifiber #1-4HSE Heat Sealed

    $94.50 / Pack

    Multifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x4″ precut pieces, Multifiber Fabric #1 with heat sealed edges can be used in dynamic
    AATCC colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric. In AATCC colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven
    staining between the multifiber fabric and test specimen, and results cannot be guaranteed.

  • Multifiber #10 Uncut 25 Meter Roll

    Multifiber #10 Uncut 25 Meter Roll

    $627.75 / Roll

    Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.

    The 3/8” wide filling stripes of the six predominant apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes to allow for cutting of consistent test specimens.

    Note: Testfabrics, Inc. does not accept any returns if any errors occur during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

  • Multifiber #10A DW Uncut 1M Pack

    Multifiber #10A DW Uncut 1M Pack

    / Pack

    AATCC & ISO (DW) Multifiber test fabric # 10A (DW), six fiber (15 mm [0.6 in.] bands) containing acetate, cotton, nylon, polyester, acrylic and wool.

    Note: Tesfabrics, Inc. does not accept any returns in case if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

  • Multifiber #10A DW Uncut 5M Pack

    Multifiber #10A DW Uncut 5M Pack

    / Pack

    AATCC & ISO (DW) Multifiber test fabric # 10A (DW), six fiber (15 mm [0.6 in.] bands) containing acetate, cotton, nylon, polyester, acrylic and wool.

    Note: Tesfabrics, Inc. does not accept any returns in case if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

  • Multifiber #10 Uncut 1M Pack

    Multifiber #10 Uncut 1M Pack

    $31.75 / meter

    Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.

    The 3/8” wide filling stripes of the six predominant apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes allows for cutting of consistent test specimens.

    Note: Testfabrics, Inc. does not accept any returns if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

  • Multifiber #10 Uncut 5M Pack

    Multifiber #10 Uncut 5M Pack

    $138.25 / Pack

    Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.

    The 3/8” wide filling stripes of the six apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes to allow for cutting of consistent test specimens.

    Note: Testfabrics, Inc. does not accept any returns if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

  • Multifiber #10A DW Uncut 25M Roll

    Multifiber #10A DW Uncut 25M Roll

    / Roll

    AATCC & ISO (DW) Multifiber test fabric # 10A (DW), six fiber (15 mm [0.6 in.] bands) containing acetate, cotton, nylon, polyester, acrylic and wool.

    Note: Tesfabrics, Inc. does not accept any returns in case if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

  • Multifiber #1-2CCE with Cold Cut Edges

    Multifiber #1-2CCE with Cold Cut Edges

    $100.50 / Pack

    Multifiber Fabric #1, is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers,
    acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x2″ precut pieces with cold cut edges. Multifiber Fabric #1 with cold cut edges should only be used in static AATCC colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC colorfastness testing, cold cut multifiber fabrics are used to evaluate potential staining of a test sample on other textiles in stationary colorfastness testing scenarios. Multifiber fabric with cold cut edges will fall apart if they are used with agitation or in a laundrometer under mechanical action.

  • Bull Denim 401 CW 25

    Bull Denim 401 CW 25

    $11.50 / meter

    Bleached White Cotton Bull Denim (jeans/ dungaree / heavy cotton twill) with optical brightener. The fabric is PFD, PFP, and is 68” white. It is an excellent grounds for dyeing, digital printing, painting, and other surface applications.

  • Bull Denim 401 CW 12

    Bull Denim 401 CW 12

    $11.50 / meter

    Bleached White Cotton Bull Denim (jeans/ dungaree / heavy cotton twill) without optical brightener. The fabric is PFD, PFP, and is 60” white. It is an excellent grounds for dyeing, digital printing, painting, and other surface applications. 

  • Storage Stuffer

    Storage Stuffer

  • Tape 1, ¾”, Twill Weave

    Tape 1, ¾”, Twill Weave

    $48.00 /Roll

    Twill weave tape 0.75” (1.9cm) wide made from 100% natural cotton yarn, free of resins, dyes, and finishes. 

  • Tape 2, 1”, Twill Weave

    Tape 2, 1”, Twill Weave

    $56.75 /Roll

    Twill weave tape 1.00” (2.54cm) wide made from 100% natural cotton yarn, free of resins, dyes, and finishes.

  • Tape 3, 1¼", Twill Weave

    Tape 3, 1¼”, Twill Weave

    $63.00 /Roll

    Twill weave tape 1.25″ (3.17cm) wide made from 100% natural cotton yarn, resins, dyes, and finishes.

  • Tape 4, 1½", Twill Weave

    Tape 4, 1½”, Twill Weave

    $69.25 /Roll

    Twill weave tape 1 ½” (3.81cm) wide made from 100% natural cotton yarn, free of resins, dyes, and finishes.

  • Tape 5, 2", Twill Weave

    Tape 5, 2″, Twill Weave

    $86.75 /Roll

    Twill weave tape 2″ (5.08cm) wide made from 100% natural cotton yarn, free of resins, dyes, and finishes

End of content

End of content