Showing 17–32 of 164 results
-
/ Pack
Testfabrics’ Multifiber Fabrics are quality control aids that have been produced since 1940 in the USA under strictly regulated production guidelines. Quality control is at each step of the manufacturing process. All raw materials are tested and approved before the multifiber fabric is woven, ensuring that performance standards are met with each new batch, and that they remain consistent over time. All production lots of finished multifiber fabric are tested and approved according to standard quality and performance benchmarks outlined in house and by the textile industry. Production is also monitored, tested, and approved by an independent ISO certified laboratory. All multifiber fabric orders include a certificate of conformity, detailed test report, and other related documentation.
-
/ Pack
Testfabrics’ Multifiber Fabrics are quality control aids that have been produced since 1940 in the USA under strictly regulated production guidelines. Quality control is at each step of the manufacturing process. All raw materials are tested and approved before the multifiber fabric is woven, ensuring that performance standards are met with each new batch, and that they remain consistent over time. All production lots of finished multifiber fabric are tested and approved according to standard quality and performance benchmarks outlined in house and by the textile industry. Production is also monitored, tested, and approved by an independent ISO certified laboratory. All multifiber fabric orders include a certificate of conformity, detailed test report, and other related documentation.
-
/ Pack
Testfabrics’ Multifiber Fabrics are quality control aids that have been produced since 1940 in the USA under strictly regulated production guidelines. Quality control is at each step of the manufacturing process. All raw materials are tested and approved before the multifiber fabric is woven, ensuring that performance standards are met with each new batch, and that they remain consistent over time. All production lots of finished multifiber fabric are tested and approved according to standard quality and performance benchmarks outlined in house and by the textile industry. Production is also monitored, tested, and approved by an independent ISO certified laboratory. All multifiber fabric orders include a certificate of conformity, detailed test report, and other related documentation.
-
$11.50 / Meter Pack
Natural Mulltifiber Fabric with eight fibers containing boiled off cotton, bleached cotton, mercerized cotton, unbleached linen, bleached linen, silk, viscose, and wool.
-
$113.00 / Pack
Multifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x2″ precut pieces, Multifiber Fabric #1 with overcast serged edges are heat sealed along the waste stripes and overcast stich serged along the filling stripes. This type of added edge finish prevents fraying and gives the multifiber test piece added stability. It can be used in rigorous colorfastness testing situations and is recommended for any tests that subject the multifiber fabric to increased agitation and movement. In AATCC colorfastness testing, heat sealed and overcast serged multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with
heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen.
-
$784.75 / Roll
Multifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. The 3/8” wide filling stripes of the six predominant apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes to allow for cutting of consistent test specimens.
Note: Tesfabrics, Inc. does not accept any returns if any errors occur during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.
-
$37.75 / Pack
Multifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. The 3/8” wide filling stripes of the six predominant apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes allows for cutting of consistent test specimens.
Note: Tesfabrics, Inc. does not accept any returns if any error occurs during cutting. For precision,consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.
-
$94.50 / Pack
Multifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x2″ precut pieces, Multifiber Fabric #1 with heat sealed edges can be used in dynamic AATCC colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric. In AATCC colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potentia staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen, and results cannot be guaranteed.
-
$100.50 / Pack
Multifiber Fabric #1, is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x4″ precut pieces with cold cut edges. Multifiber Fabric #1 with cold cut edges should
only be used in static AATCC colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC colorfastness testing, cold cut multifiber fabrics are used to evaluate potential staining of a test sample on other textiles in stationary colorfastness testing scenarios. Multifiber fabric with cold cut edges will fall apart if they are used with agitation or in a laundrometer under mechanical action.
-
$94.50 / Pack
Multifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x4″ precut pieces, Multifiber Fabric #1 with heat sealed edges can be used in dynamic
AATCC colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric. In AATCC colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven
staining between the multifiber fabric and test specimen, and results cannot be guaranteed.
-
$100.50 / Pack
Multifiber Fabric #1, is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers,
acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x2″ precut pieces with cold cut edges. Multifiber Fabric #1 with cold cut edges should only be used in static AATCC colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC colorfastness testing, cold cut multifiber fabrics are used to evaluate potential staining of a test sample on other textiles in stationary colorfastness testing scenarios. Multifiber fabric with cold cut edges will fall apart if they are used with agitation or in a laundrometer under mechanical action.
-
-
/ Pack
Ballast according to customer’s specifications
AATCC test method 88B and others calling for Ballast Load developed in 1962 was based on ballast load solely provided by Testfabrics, Inc. Recently updated ISO Ballast Type I & II is derived from same or similar fabrics.
During 50 years of continuous supply, there have been continuous product improvements based on decades of customer feedback worldwide resulted in making it “the first choice” of leading labs around the globe.
If you need something different, we can manufacture Ballast (Makeweights) Loads in different or mixed materials from our large inventory of Standard Fabrics according to your specified weights or dimensions.
Contact us for more details.
-
Kenmore or Whirlpool Dryer (Domestic/International)
-
AATCC UV Calibration Reference Fabric, includes certificate.
-
/ Skeins
5 Gram 40/2 Greige Cotton for Draves Test
End of content
End of content
