Showing all 14 results
The AATCC Gray Scale for Staining is designed to visually evaluate the degree of color staining from a tested textile to an adjacent material.
The scale consists of a series of gray chips arranged in numerical steps, each representing a visually perceptible difference in staining rating from 5 (no staining) to 1 (severe staining).
The AATCC Gray Scale for Color Change is designed to visually evaluate the changes in color of textiles resulting from colorfastness tests.
The scale consists of nine pairs of gray chips, which illustrate color differences and provide a corresponding fastness rating from 1 to 5, with 5 indicating excellent color retention and 1 indicating poor retention.
The AATCC gray scale measures color change. One half of each color chip pair is the same color as the untested specimen before colorfastness testing. The second half of the color chip ranges from the starting color (no loss of color) to white (loss of all color). The amount of contrast between the tested fabric and untested fabric is related to one of the pairs of gray color chips on the gray scale for color change.
Multifiber Fabric #10, a filling stripe multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
Available as 2″x2″ precut pieces with cold cut edges. Multifiber Fabric #10 with cold cut edges should only be used in static AATCC colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC colorfastness testing, cold cut multifiber fabrics are used primarily to evaluate potential staining of a test sample on other textiles in tests that do not agitate the test material. Multifiber fabric with cold cut edges will fall apart if they are used in tests that involve agitation.
Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
The 3/8” wide filling stripes of the six predominant apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes to allow for cutting of consistent test specimens.
Note: Testfabrics, Inc. does not accept any returns if any errors occur during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.
Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
The 3/8” wide filling stripes of the six predominant apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes allows for cutting of consistent test specimens.
Note: Testfabrics, Inc. does not accept any returns if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.
Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
The 3/8” wide filling stripes of the six apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes to allow for cutting of consistent test specimens.
Note: Testfabrics, Inc. does not accept any returns if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.
Multifiber Fabric #1, is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers,
acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x2″ precut pieces with cold cut edges. Multifiber Fabric #1 with cold cut edges should only be used in static AATCC colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC colorfastness testing, cold cut multifiber fabrics are used to evaluate potential staining of a test sample on other textiles in stationary colorfastness testing scenarios. Multifiber fabric with cold cut edges will fall apart if they are used with agitation or in a laundrometer under mechanical action.
Blotting paper is an absorbent nonwoven material used in several AATCC test methods for water resistance or repellency (TM 8, 35, 42, 70, and 116). It can be cut to size as needed.
The 10″ x 10″ size blotting paper contains 100 sheets/pack and is used in AATCC Test Method 70 Water Repellency: Tumble Jar Dynamic Absorption Test.
Blotting paper is an absorbent nonwoven material used in several AATCC test methods for water resistance or repellency (TM 8, 35, 42, 70, and 116). It can be cut to size as needed.
The 6″ x 6″ size blotting paper contains 100 sheets/pack and is used in AATCC Test Method 35 Water Resistance: Rain Test.
Blotting paper is an absorbent nonwoven material used in several AATCC test methods for water resistance or repellency (TM 8, 35, 42, 70, and 116). It can be cut to size as needed.
The 6″ x 9″ size blotting paper contains 100 sheets/pack and is used in AATCC Test Method 42 Water Resistance: Impact Penetration Test.
Blotting paper is an absorbent nonwoven material used in several AATCC test methods for water resistance or repellency (TM 8, 35, 42, 70, and 116). It can be cut to size as needed.
Premixed Reagents for acid perspiration solution
Ready to use, premixed chemicals:
(1) 10 ± 0.01 g sodium chloride (NaCl)
(2) 1 ± 0.01 g lactic acid, USP 85%
(3) 1 ± 0.01 g sodium phosphate, dibasic, anhydrous (Na2HPO4)
(4) 0.25 ± 0.001 g l-histidine monohydrochloride (C6H9N3O2⋅HCl⋅H2O)
End of content
End of content
Our team can help you source the right solution for your application.
Request Product InformationGlobal support. Local expertise.
Testfabrics, Inc.
+1 570-603-0432
info@testfabrics.com
415 Delaware Avenue West Pittston, Pa 18643
Made in the USA
Our multifiber products are made in Pennsylvania and trusted
worldwide.
48 Agents Worldwide
Need local support? We’ll connect you
to your nearest agent.
Stay Connected
Receive updates on products, testing
standards, and innovation tools.
© 2026 Testfabrics. All Rights Reserved.
No products in the cart.
