AA Standard Of Fading For Xenon Reference FABRIC-1
/ PieceStandard of Fading for XRF-1 is purple polyester fabric that has been faded to the specified endpoint as described in AATCC Test Method 16 Colorfastness to Light.
Showing 337–352 of 446 results
-
-
-
-
-
-
-
AA 1993 Standard Reference Detergent – 24LB
/ Bucket1993 Standard Reference Detergent is manufactured to AATCC specifications and DOES contain optical brighteners. Provided in a 24 lb bucket.
-
ISO Crock Cloth (cotton Lawn) 1M Pack
/ PackISO Crockmeter Cloth/Cotton Rubbing Lawn with Certificate of Conformity & Test Report
-
AA Rubberized Jute Hair Cushion
/ PieceRubberized Jute Hair Cushion Underlay (100 x 100 cm) is used in AATCC Test Method 134 Electrostatic Propensity of Carpets.
-
ISO PA 250 G
/ JarISO 105-E04 Powder A, Colour fastness to acid perspiration (pH 5.5)
Composition:
L-histidine monohydrochloride monohydrate
Sodium Chloride
Sodium dihydrogen phosphate dihydrate -
Polypropylene Mesh
/ Linear Meter100% polypropleyne material for ISO 105-C series where called for, ~105 cm wide
-
AATCC Powder DET OPT 1KG
/ BucketAATCC 1993 Standard Reference Powder Detergent WITH optical brighteners in 1 Kg special Bucket to withstand High Temperatures.
-
-
ISO Ballast II
/ PackISO 6330
Ballast Type II
50% Polyester / 50% Cotton
Pack of 8 Pieces is approx 2 Kg -
Multifiber #10 Precut 2X2 OCE Pieces – Box Of 500
$88.00 / PackMultifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
Available as 2″x2″ precut pieces, Multifiber Fabric #10 with overcast serged edges are heat sealed along the waste stripes and overcast stich serged along the filling stripes. This type of added edge finish prevents fraying and gives the multifiber test piece added stability. It can be used in rigorous colorfastness testing situations and is recommended for any tests that subject the multifiber fabric to increased agitation and movement.
In AATCC colorfastness testing, heat sealed and overcast serged multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen.
-
End of content
End of content
