Showing 353–368 of 452 results
-
$88.00 / Pack
Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
Available as 2″x2″ precut pieces, Multifiber Fabric #10 with overcast serged edges are heat sealed along the waste stripes and overcast stich serged along the filling stripes. This type of added edge finish prevents fraying and gives the multifiber test piece added stability. It can be used in rigorous colorfastness testing situations and is recommended for any tests that subject the multifiber fabric to increased agitation and movement.
In AATCC colorfastness testing, heat sealed and overcast serged multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen.
-
-
/ Pack
SM 26 Felt
Pre cut 125 mm Circles
-
/ Piece
Stain Release Scale for AATCC Test Method 130
-
$25.25 / Meter
The ISO Adjacent Acrylic is a plain weave, medium weight, acrylic fabric. It does not contain any finishes, resins, binders, softeners, or dyes. It is used as an acrylic single fiber adjacent fabric in ISO 105 tests. It conforms to the specifications outlined for adjacent fabrics and acrylic in ISO 105-A01 and F05. Adjacent fabrics are undyed cloths used in colorfastness testing for the assessment of staining. The general principal of the color fastness tests involves a specimen of a textile to be tested with the adjacent fabric attached to it. Any staining that occurs on the adjacent fabric after the test is evaluated.
-
$125.75 / Pack
The ISO Adjacent Acrylic is a plain weave, medium weight, acrylic fabric. It does not contain any finishes, resins, binders, softeners, or dyes. It is used as an acrylic single fiber adjacent fabric in ISO 105 tests. It conforms to the specifications outlined for adjacent fabrics and acrylic in ISO 105-A01 and F05. Adjacent fabrics are undyed cloths used in colorfastness testing for the assessment of staining. The general principal of the color fastness tests involves a specimen of a textile to be tested with the adjacent fabric attached to it. Any staining that occurs on the adjacent fabric after the test is evaluated.
-
/ Pack
Polychloroprene Liners For Random Tumble Pilling Tester for ISO 12945-3.
-
-
/ Unit
Photographic Scales for AATCC Test Methods 88B and 143
-
/ Pack
AATCC Detergent 171 is used in AATCC Test Method 171 (Carpets: Cleaning of; Hot Water Extraction), AATCC Test Method 137 (Rug Back Staining on Vinyl Tile) and AATCC Test Method 138 (Cleaning: Washing of Textile Floor Coverings) and any other TM where listed. Provided in a 5 lb bucket.
-
/ Box
AATCC Crock 4 Pieces
1″ X 4″ (Straight Edges)
-
Each
AATCC 1993 Standard Reference Powder Detergent WITHOUT optical brighteners Drum
-
$63.00 / box
Multifiber Fabric #10A is a multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 4cm x 10cm precut pieces, Multifiber Fabric #10A with overcast serged edges are heat
sealed along the waste stripes and overcast stich serged along the filling stripes. This type of added edge finish prevents fraying and gives the multifiber test piece added stability. It can be used in rigorous colorfastness testing situations and is recommended for any tests that subject the multifiber fabric to increased agitation and movement. In AATCC and ISO colorfastness testing, heat sealed and overcast serged multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber
fabrics with heat sealed and overcast edges should not be used in stationary tests because the raised and melted edge can cause uneven staining between the multifiber fabric and test specimen.
-
/ Jar
ISO 105-E04 Powder B, Colour fastness to alkaline perspiration (pH 8.00)
Composition:
L-histidine monohydrochloride monohydrate
Sodium Chloride
Sodium dihydrogen phosphate dihydrate
-
/ Pack
Thread and Needle Package for ASTM D1683/D1683M – 17
Package containing A, B & C
A: Fabric Mass ≤ 4 oz/sq yd (130 grams/sq meter)
AT: 1 of 6000 yards cone Spun Polyester Tex 40
AN: 5 of Needle Size 90, Chrome, thin ball
B: Fabric Mass ≥ 4 oz/sq yd (130 grams/sq meter) ≤ 8 oz/sq yd (270 grams/sq meter)
BT: 1 of 6000 yards cone Spun Polyester Tex 60
BN: 5 of Needle Size 110, Chrome, ball
C: Fabric Mass ≥ 8 oz/sq yd (270 grams/sq meter) ≤ 12 oz/sq yd (405 grams/sq meter)
CT:1 of 6000 yards cone Spun Polyester Tex 80
CN: 5 of Needle Size 120, Chrome, ball
-
$188.50 / Roll
AATCC Crockmeter Coth 25 meter roll comes with a detailed test report and certificate of conformity. Dimensions of the fabric: 25 meters long x 1.37meter wide (54”)
End of content
End of content
