AATCC Powder DET WOB 1KG
/ BucketAATCC 1993 Standard Reference Powder Detergent WITHOUT optical brighteners in 1 Kg special Bucket to withstand High Temperatures.
Showing 177–192 of 261 results
-
-
IAC Silk Standard Reference Control Fabric
$20.00 / PieceThis fabric was tested by the IAC and found to be an acceptable (SRC) standard untreated reference control fabric. It is a consistent, chemically neutral, silk fabric that will exhibit predictable background microbial growth and odor absorption activity when used with methods such as AATCC TM100, AATCC
TM216, ASTM E2149, ISO 20743, ISO 17299-3, and IACM 0714. -
-
-
AA 1993 Standard Reference Detergent WOB – 24LB
/ Bucket1993 AATCC Standard Detergent WOB (without optical brightener) is used in AATCC Test Method 61 to evaluate the washfastness of fabrics. Detergent is provided in a 24 lb bucket.
-
AA Dye Dusting Photographic Rating Scale
/ KitDye Dusting Photographic Rating Scale is a photograph rating scale used in AATCC Test Method 170, Dusting Propensity of Powder Dyes
-
Cork Liner Custom Size
/ PackCustom Size CORK LINERS for Pilling Tester
5.75 in. wide x 17.95 in.Made in USA
-
Multifiber #10 Precut 2X4 CCE Pieces – Pack of 250
$81.75 / PackMultifiber Fabric #10, is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x4″ precut pieces with cold cut edges. Multifiber Fabric #10 with cold cut edges should only be used in static AATCC colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC colorfastness testing, cold cut multifiber fabrics are used to evaluate potential staining of a test sample on other textiles in stationary colorfastness testing scenarios. Multifiber fabric with cold cut edges will fall apart if they are used with agitation or in a laundrometer under mechanical action.
-
ISO 105-F02 Cotton Adjacent Fabric, 1 meter pack
$9.25 /MeterThe ISO Adjacent Cotton is a plain weave, medium weight, cotton fabric. It does not contain any finishes, resins, binders, softeners, or dyes. It is used as a cotton single fiber adjacent fabric in ISO 105 tests. It conforms to the specifications outlined for adjacent fabrics and cotton in ISO 105-A01 and F02. Adjacent fabrics are undyed cloths used in colorfastness testing for the assessment of staining. The general principal of the color fastness tests involves a specimen of a textile to be tested with the adjacent fabric attached to it. Any staining that occurs on the adjacent fabric after the test is evaluated.
-
CFR 1610
/ ConeCFR 1610 THREAD: 3-ply, white, mercerized, 100% cotton sewing thread, with a Tex size of 40±5. 6,000 yards/5,486 meters/cone
-
AA Dye Dusting Paper Collar
/ PackDye Dusting Paper Collar is used in AATCC Test Method 170, Dusting Propensity of Powder Dyes. (50 per package).
-
Uload 10 10
100% Cotton Starting At 12″ x 12″ (305 x 305 mm), Double Hemmed To A Size Of Approximately 10″ x 10″ (255 x 255 mm) for UL 1206, UL 1240, UL 2157, ANSI Z21.5.2-2016, CSA 7.2-2016
1 Pack Of 20 pcs Approx. Weight 0.28 kg
-
AA 20 AFU Blue Wool Lightfastness Standard, L2 LOT 9
/ UnitUse Blue Wool Lightfastness Standard specimens to calibrate and verify lightfastness testing as specified in applicable AATCC Test Methods. Measure 20 AATCC Fading Units (AFU) (85 kJ/m2nm @ 420 nm). L2 is approved for use in place of L4 for 20 AFU tests.
-
-
-
End of content
End of content
