Showing 209–224 of 284 results
-

/ Unit
Use Blue Wool Lightfastness Standard specimens to calibrate and verify lightfastness testing as specified in applicable AATCC Test Methods. Measure 20 AATCC Fading Units (AFU) (85 kJ/m2nm @ 420 nm). L2 is approved for use in place of L4 for 20 AFU tests.
-

/ Bottle
Perksheen Cleaning Fluid for AATCC Test Method 132 (Dry Cleaning)
-

/ Jar
sodium chloride (NaCl)
Powder form
-

Kenmore or Whirlpool Washer (Domestic/International)
-

/ Bucket
1993 Standard Reference Detergent is manufactured to AATCC specifications and DOES contain optical brighteners. Provided in a 24 lb bucket.
-

/ Pack
ISO Crockmeter Cloth/Cotton Rubbing Lawn with Certificate of Conformity & Test Report
-

/ Piece
Rubberized Jute Hair Cushion Underlay (100 x 100 cm) is used in AATCC Test Method 134 Electrostatic Propensity of Carpets.
-

/ Bucket
AATCC 1993 Standard Reference Powder Detergent WITH optical brighteners in 1 Kg special Bucket to withstand High Temperatures.
-

/ Pack
ISO 6330
Ballast Type II
50% Polyester / 50% Cotton
Pack of 8 Pieces is approx 2 Kg
-

$88.00 / Pack
Multifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
Available as 2″x2″ precut pieces, Multifiber Fabric #10 with overcast serged edges are heat sealed along the waste stripes and overcast stich serged along the filling stripes. This type of added edge finish prevents fraying and gives the multifiber test piece added stability. It can be used in rigorous colorfastness testing situations and is recommended for any tests that subject the multifiber fabric to increased agitation and movement.
In AATCC colorfastness testing, heat sealed and overcast serged multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen.
-

/ Piece
Stain Release Scale for AATCC Test Method 130
-

-

/ Unit
Photographic Scales for AATCC Test Methods 88B and 143
-

/ Pack
AATCC Detergent 171 is used in AATCC Test Method 171 (Carpets: Cleaning of; Hot Water Extraction), AATCC Test Method 137 (Rug Back Staining on Vinyl Tile) and AATCC Test Method 138 (Cleaning: Washing of Textile Floor Coverings) and any other TM where listed. Provided in a 5 lb bucket.
-

/ Box
AATCC Crock 4 Pieces
1″ X 4″ (Straight Edges)
-

Each
AATCC 1993 Standard Reference Powder Detergent WITHOUT optical brighteners Drum
End of content
End of content