Multifiber #10A-5CCE, , Box of 250 pieces
$56.75 / Box
Multifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 5cm x 10cm (2” x 4”) precut pieces with cold cut edges. Multifiber Fabric #10A (DW) with cold cut edges should only be used in static AATCC and ISO colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC and ISO colorfastness testing, cold cut multifiber fabrics are used primarily to evaluate potential staining of a test sample on other textiles in tests that do not agitate the test material. Multifiber fabric with cold cut edges will fall apart if they are used in tests that involve agitation.
Description
Testfabrics’ Multifiber Fabrics have been produced since 1940 in the USA under strictly regulated production guidelines. Quality control is at each step of the manufacturing process. All raw materials are tested and approved before the multifiber fabric is woven, ensuring that performance standards are met with each new batch, and that they remain consistent over time. All production lots of finished multifiber fabric are tested and approved according to standard quality and performance benchmarks outlined in house and by the textile industry. Production is also monitored, tested, and approved by an independent ISO certified laboratory. All multifiber fabric orders include a certificate of conformity, detailed test report, and other related documentation.
General Information
| Product Name | Multifiber #10A-5CCE, , Box of 250 pieces |
| Product Number | 0403004 |
| Fabric Construction | Woven, Plain Weave |
| Net Weight one box | 400g |
| Test Methods | AATCC EP 11, AATCC EP 10, AATCC TM 101, AATCC TM 117, AATCC TM 132 |
| Testing Standards | AATCC 1. TM (TEST METHODS), AATCC 2. EP (EVALUATION PROCEDURES) |
| MOQ | 1 Pack |
Fabric Characteristics
| Yarn – Warp | Filament Polyester |
| Yarn- Filling | Acetate
Bleached Cotton Nylon Polyester Acrylic Wool |
| Dyes that can be used with | Acid, Basic, Disperse, Direct, Natural, Reactive, Vat, RIT |
| Face side appearance | Fabric with six different weft stripes, plain woven |
| Back Side appearance | Face and back are the same structure. |
| Fabric Hand | Each fiber stripe is slightly different in appearance due to it’s chemical and physical structure. Edge has been cut with scissors or rotary blade; the edges are smooth and are not raised or fused, creating a uniform surface without any raised edge for color transfer. |
Primary Uses by Industry
| Industry Type | Specifications |
| Quality Assurance | AATCC MFF #10A (DW) 5 CCE, cold cut edge, static colorfastness tests AATCC TM 117 Test Method for Colorfastness to Dry Heat (Excluding Pressing) AATCC TM 125 Test Method for Colorfastness to Perspiration and Light AATCC EP 10, Multifiber Adjacent Fabrics ISO 105-A01 General principles of testing ISO 105-E01 Colour fastness to Water ISO 105-E02 Colour fastness to Sea Water ISO 105-E03 Colour fastness to Chlorinated Water (Swimming Pool Water) ISO 105-E04 Colour fastness to Perspiration ISO 105-F10 Specification for adjacent fabric: Multifibre. ISO 105-P01 Colour fastness to Dry Heat (Excluding Pressing) ISO 105-P02 Colour fastness to Pleating: Steam Pleating |
Reviews
There are no reviews yet.