Showing all 11 results

  • AATCC 9 Step Chromatic Transference Scale

    AATCC 9 Step Chromatic Transference Scale

    $560.00 / Scale

    The AATCC 9-Step Chromatic Transference Scale is an evaluation scale used to assess color loss, color transfer, and color staining in AATCC test methods.

    View Product
  • AATCC Gray Scale For Staining

    AATCC Gray Scale For Staining

    $344.00 / Scale

    The AATCC Gray Scale for Staining is designed to visually evaluate the degree of color staining from a tested textile to an adjacent material.

    The scale consists of a series of gray chips arranged in numerical steps, each representing a visually perceptible difference in staining rating from 5 (no staining) to 1 (severe staining).

     

    View Product
  • AATCC Gray Scale For Color Change

    AATCC Gray Scale For Color Change

    $344.00 / Scale

    The AATCC Gray Scale for Color Change is designed to visually evaluate the changes in color of textiles resulting from colorfastness tests. 

    The scale consists of nine pairs of gray chips, which illustrate color differences and provide a corresponding fastness rating from 1 to 5, with 5 indicating excellent color retention and 1 indicating poor retention. 

    The AATCC gray scale measures color change. One half of each color chip pair is the same color as the untested specimen before colorfastness testing. The second half of the color chip ranges from the starting color (no loss of color) to white (loss of all color). The amount of contrast between the tested fabric and untested fabric is related to one of the pairs of gray color chips on the gray scale for color change. 

    View Product
  • Multifiber #10A (DW): 5 X 10 HSE, Box of 250 pieces

    Multifiber #10A (DW): 5 X 10 HSE, Box of 250 pieces

    $50.25 / box

    Multifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon (polyamide), polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 5cm x 10cm precut pieces with heat sealed edges, MFF 10A-5HSE can be used in dynamic AATCC and ISO colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric. In AATCC and ISO colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen, and results cannot be guaranteed.

    View Product
  • Multifiber #10A-5CCE, , Box of 250 pieces

    Multifiber #10A-5CCE, , Box of 250 pieces

    $56.75 / Box

    Multifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 5cm x 10cm (2” x 4”) precut pieces with cold cut edges. Multifiber Fabric #10A (DW) with cold cut edges should only be used in static AATCC and ISO colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC and ISO colorfastness testing, cold cut multifiber fabrics are used primarily to evaluate potential staining of a test sample on other textiles in tests that do not agitate the test material. Multifiber fabric with cold cut edges will fall apart if they are used in tests that involve agitation.

    View Product
  • Multifiber #10A (DW) PRECUT 4X10 HSE , Box of 250 pieces

    Multifiber #10A (DW) PRECUT 4X10 HSE , Box of 250 pieces

    $48.00 / Box

    Multifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon (polyamide), polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.

    Available as 4cm x 10cm precut pieces with heat sealed edges, MFF 10A-4HSE can be used in dynamic AATCC and ISO colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric.

    In AATCC and ISO colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen, and results cannot be guaranteed.

     

    View Product
  • Multifiber #10A-4CCE, Box of 250 Pieces

    Multifiber #10A-4CCE, Box of 250 Pieces

    $50.25 / Box

    Multifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 4cm x 10cm precut pieces with cold cut edges. Multifiber Fabric #10A (DW) with cold cut edges should only be used in static AATCC and ISO colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC and ISO colorfastness testing, cold cut multifiber fabrics are used primarily to evaluate potential staining of a test sample on other textiles in tests that do not agitate the test material. Multifiber fabric with cold cut edges will fall apart if they are used in tests that involve agitation.

    View Product
  • Multifiber #10A DW Uncut 1 Meter Pack

    Multifiber #10A DW Uncut 1 Meter Pack

    $37.75 / Pack

    Multifiber Fabric #10A is a multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. The 15mm / 0.6” wide filling stripes of the six predominant apparel fibers, are woven in a four inch
    repeat and with a ‘separator/cutting/ waste’ stripe, between each of the four inch repeats, of the six fiber stripes, allows for cutting of consistent test specimens.
    Note: Testfabrics, Inc. does not accept any returns, if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

    View Product
  • Multifiber #10A DW Uncut 5 Meter Pack

    Multifiber #10A DW Uncut 5 Meter Pack

    $182.25 / Pack

    Multifiber Fabric #10A is a multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. The 15mm / 0.6” wide filling stripes of the six predominant apparel fibers, are woven in a four inch
    repeat and with a ‘separator/cutting/ waste’ stripe, between each of the four inch repeats, of the six fiber stripes, allows for cutting of consistent test specimens.

    Note: Testfabrics, Inc. does not accept any returns, if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

    View Product
  • Multifiber #10A DW Uncut 25 Meter Roll

    Multifiber #10A DW Uncut 25 Meter Roll

    $878.75 / Roll

    Multifiber Fabric #10A is a multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. The 15mm / 0.6” wide filling stripes of the six predominant apparel fibers, are woven in a four inch
    repeat and with a ‘separator/cutting/ waste’ stripe, between each of the four inch repeats, of the six fiber stripes, allows for cutting of consistent test specimens.

    Note: Testfabrics, Inc. does not accept any returns, if any error occurs during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.

    View Product
  • Multifiber #10A DW Precut 4X10 OCE Pieces, Box of 250

    Multifiber #10A DW Precut 4X10 OCE Pieces, Box of 250

    $63.00 / box

    Multifiber Fabric #10A is a multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 4cm x 10cm precut pieces, Multifiber Fabric #10A with overcast serged edges are heat
    sealed along the waste stripes and overcast stich serged along the filling stripes. This type of added edge finish prevents fraying and gives the multifiber test piece added stability. It can be used in rigorous colorfastness testing situations and is recommended for any tests that subject the multifiber fabric to increased agitation and movement. In AATCC and ISO colorfastness testing, heat sealed and overcast serged multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber
    fabrics with heat sealed and overcast edges should not be used in stationary tests because the raised and melted edge can cause uneven staining between the multifiber fabric and test specimen.

    View Product

End of content

End of content