AATCC 9 Step Chromatic Transference Scale
$560.00 / ScaleThe AATCC 9-Step Chromatic Transference Scale is an evaluation scale used to assess color loss, color transfer, and color staining in AATCC test methods.
Showing 1–16 of 40 results
-
-
AATCC Gray Scale For Staining
$344.00 / ScaleThe AATCC Gray Scale for Staining is designed to visually evaluate the degree of color staining from a tested textile to an adjacent material.
The scale consists of a series of gray chips arranged in numerical steps, each representing a visually perceptible difference in staining rating from 5 (no staining) to 1 (severe staining).
-
AATCC Gray Scale For Color Change
$344.00 / ScaleThe AATCC Gray Scale for Color Change is designed to visually evaluate the changes in color of textiles resulting from colorfastness tests.
The scale consists of nine pairs of gray chips, which illustrate color differences and provide a corresponding fastness rating from 1 to 5, with 5 indicating excellent color retention and 1 indicating poor retention.
The AATCC gray scale measures color change. One half of each color chip pair is the same color as the untested specimen before colorfastness testing. The second half of the color chip ranges from the starting color (no loss of color) to white (loss of all color). The amount of contrast between the tested fabric and untested fabric is related to one of the pairs of gray color chips on the gray scale for color change.
-
AATCC Crockmeter Squares Box
$20.50 / BoxPrecut 2” x 2” with straight edges, AATCC Crockmeter squares are packaged 1000 pieces per case of 5 individual boxes. Each box includes a certificate of conformity and detailed test report.
-
Multifiber #49 – 10 Meter Roll
$63.00 / RollNatural and Synthetic Mulltifiber Fabric with eight fibers containing acetate, cotton, nylon, polyester, acrylic, silk, viscose and wool.
-
AATCC Crockmeter Cloth – 1 Meter Pack
$9.25 / PackAATCC Crockmeter Cloth 1 meter pack is folded and comes with a certificate of conformity and detailed test report.
Dimensions of the fabric: 1 meter long x 1.37meter wide / 39.37“ long x 54” wide
-
AATCC Crockmeter Cloth – 5 Meter Pack
$37.75 / PackAATCC Crockmeter Coth 5 meter pack is folded and comes with a detailed test report and certificate of conformity. Dimensions of the fabric: 5 meters long x 1.37meter wide / 196.85” long x 54” wide
-
Multifiber #10A (DW): 5 X 10 HSE, Box of 250 pieces
$50.25 / boxMultifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon (polyamide), polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 5cm x 10cm precut pieces with heat sealed edges, MFF 10A-5HSE can be used in dynamic AATCC and ISO colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric. In AATCC and ISO colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen, and results cannot be guaranteed.
-
Multifiber #10A-5CCE, , Box of 250 pieces
$56.75 / BoxMultifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 5cm x 10cm (2” x 4”) precut pieces with cold cut edges. Multifiber Fabric #10A (DW) with cold cut edges should only be used in static AATCC and ISO colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC and ISO colorfastness testing, cold cut multifiber fabrics are used primarily to evaluate potential staining of a test sample on other textiles in tests that do not agitate the test material. Multifiber fabric with cold cut edges will fall apart if they are used in tests that involve agitation.
-
Multifiber #10A (DW) PRECUT 4X10 HSE , Box of 250 pieces
$48.00 / BoxMultifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon (polyamide), polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
Available as 4cm x 10cm precut pieces with heat sealed edges, MFF 10A-4HSE can be used in dynamic AATCC and ISO colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric.
In AATCC and ISO colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen, and results cannot be guaranteed.
-
Multifiber #10A-4CCE, Box of 250 Pieces
$50.25 / BoxMultifiber Fabric #10A (DW), a filling stripe multifiber fabric with approximately 15 mm (0.6 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester. Available as 4cm x 10cm precut pieces with cold cut edges. Multifiber Fabric #10A (DW) with cold cut edges should only be used in static AATCC and ISO colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC and ISO colorfastness testing, cold cut multifiber fabrics are used primarily to evaluate potential staining of a test sample on other textiles in tests that do not agitate the test material. Multifiber fabric with cold cut edges will fall apart if they are used in tests that involve agitation.
-
Multifiber #10-2HSE – Pack of 500
$75.50 / PackMultifiber Fabric #10 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
Available as 2″x2″ precut pieces, Multifiber Fabric #10 with heat sealed edges can be used in dynamic AATCC colorfastness tests that involve agitation and movement of the test pieces. Heat Sealed multifiber fabrics have a melted or fused edge, which reduces fraying and increases stability in the multifiber fabric test fabric.
In AATCC colorfastness testing, heat sealed multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen, and results cannot be guaranteed.
-
Multifiber #10-2CCE – Pack of 500
$81.75 / PackMultifiber Fabric #10, a filling stripe multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, polyester, acrylic, and worsted wool yarns, woven on a warp of filament polyester.
Available as 2″x2″ precut pieces with cold cut edges. Multifiber Fabric #10 with cold cut edges should only be used in static AATCC colorfastness tests. Cold cut multifiber fabrics have a clean level edge. In AATCC colorfastness testing, cold cut multifiber fabrics are used primarily to evaluate potential staining of a test sample on other textiles in tests that do not agitate the test material. Multifiber fabric with cold cut edges will fall apart if they are used in tests that involve agitation.
-
Multifiber #50 – 1 Meter Pack
$11.50 / Meter PackNatural Mulltifiber Fabric with eight fibers containing boiled off cotton, bleached cotton, mercerized cotton, unbleached linen, bleached linen, silk, viscose, and wool.
-
Multifiber #1-2OCE Heat Sealed
$113.00 / PackMultifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. Available as 2″x2″ precut pieces, Multifiber Fabric #1 with overcast serged edges are heat sealed along the waste stripes and overcast stich serged along the filling stripes. This type of added edge finish prevents fraying and gives the multifiber test piece added stability. It can be used in rigorous colorfastness testing situations and is recommended for any tests that subject the multifiber fabric to increased agitation and movement. In AATCC colorfastness testing, heat sealed and overcast serged multifiber fabrics are used primarily to evaluate potential staining of a dyed or printed test sample on other textiles in wash tests where the test material experiences agitation and movement during the testing process. Multifiber fabrics with
heat sealed edges should not be used in stationary tests because the raised melted edge can cause uneven staining between the multifiber fabric and test specimen. -
Multifiber #1: Uncut 25M Roll
$784.75 / RollMultifiber Fabric #1 is a multifiber fabric with approximately 8 mm (0.33 inch) filling stripes of 6 fibers, acetate, bleached cotton, nylon, silk, viscose, and worsted wool yarns, woven on a warp of filament polyester. The 3/8” wide filling stripes of the six predominant apparel fibers, woven in a two inch repeat and with a ‘separator/cutting/ waste’ stripe between each of the two inch repeats of the six fiber stripes to allow for cutting of consistent test specimens.
Note: Tesfabrics, Inc. does not accept any returns if any errors occur during cutting. For precision, consistency and efficiency we recommend MFF PRECUT PIECES available in Cold Cut Edges, Heat Sealed Edges & Overcast Edges.
End of content
End of content
